When tackling a replace oven control board, swapping out the electronic module that tells an oven how hot to get and when to shut off. Also called the oven controller, this part sits behind the front panel and talks to the thermostat, heating element and keypad. A faulty board can cause temperature swings, no heat, or random error codes, so understanding what you’re replacing is the first step.
Every oven’s brain works with a few close partners. The oven thermostat, a sensor that measures the cavity temperature and feeds data back to the board decides when to pulse the heating element. The oven heating element, the resistive coil that actually generates heat follows the board’s commands. In electric models, the electric oven, a kitchen appliance that uses electricity for baking and roasting relies on these three parts to stay in sync. If the board fails, the thermostat may get wrong readings, the element may stay off, and the whole system stalls. Knowing this chain helps you diagnose before you order a new board.
Replacing the board isn’t just unplugging a cable. You’ll need a screwdriver set, a multimeter, and preferably a photo of the original wiring layout. Safety comes first: turn off the breaker, wait a few minutes for capacitors to discharge, and wear insulated gloves. After you remove the front panel, you’ll see a ribbon cable connecting the board to the thermostat and element. Test the board’s continuity with a multimeter; a short or open circuit means it’s time for a swap. Once the old board is out, line up the new one, reconnect the ribbon, and secure it with the mounting screws.
Costs vary. A basic control board for a standard electric oven runs between £70 and £150, while high‑end models can hit £250. Labor at a local repair shop usually adds £80‑£120, but a confident DIYer can save that fee. However, if the oven shows signs of water damage, burnt wiring, or a blown fuse, it’s smarter to call a professional. Mistakes in wiring can damage other components or create a fire risk, so weigh your confidence level against the potential repair bill.
Below you’ll find a curated set of articles that walk through common oven issues, from diagnosing a bad thermostat to checking the heating element, plus safety checklists for DIY repairs. Use them as a roadmap whether you decide to replace the board yourself or call in Northampton Appliance Repairs Services for a fast, guaranteed fix.
Learn how to decide if swapping your oven's control board is worth it. We cover symptoms, diagnosis, costs, DIY vs. professional repair, and a handy decision checklist.
Continue reading...