Oven Control Board Replacement – Guide, Costs & DIY Tips
If your oven is acting weird – not heating, skipping temperatures, or showing error codes – the control board is often the culprit. It’s the brain that tells the heating elements when to turn on and off. A bad board can leave you with a useless oven, but fixing it isn’t always a nightmare. Below you’ll find the signs, a simple step‑by‑step fix, and tips on when to hand the job over to a professional.
How to Tell Your Oven Needs a New Control Board
First, rule out the easy stuff. Check the power supply, make sure the door latch is working, and look for blown fuses. If everything else checks out, look for these tell‑tale signs:
Temperature won’t stay steady or keeps jumping.
Display shows blanks, flickers, or weird symbols.
Buttons or touchpad become unresponsive.
Oven starts heating but stops halfway through a cycle.
When these symptoms line up, the control board is the most likely suspect. You can usually confirm by opening the oven’s rear panel and inspecting the board for burnt spots, cracked components, or a strong burnt smell.
DIY Replacement Steps and Safety Tips
Got the right tools and a bit of confidence? Here’s a quick walk‑through:
Turn off the power. Unplug the oven or switch off the circuit breaker. Safety first – a live board can shock you.
Remove the back panel. Unscrew the mounting screws and set the panel aside. You’ll see the control board mounted near the top.
Disconnect wiring. Take a photo of the wiring layout, then unplug the connectors. Press the release tabs gently to avoid breaking pins.
Unscrew the board. Most boards are held by two or three screws. Keep them handy.
Swap in the new board. Position it, re‑secure the screws, and plug the connectors back in exactly as they were.
Reassemble and test. Put the back panel back, turn the power on, and run a quick bake cycle. If the oven heats and the display works, you’re done.
If anything feels off – wires not matching, connectors stuck, or you notice additional damage – stop and call a local technician. A mis‑wired board can cause further problems or even a fire.
Typical cost for a replacement board in Northampton ranges from £80 to £150 for the part, plus £50‑£100 for labour if you hire a pro. Doing it yourself saves the labour charge, but factor in time and the risk of a wrong connection.
When you’re not comfortable opening the oven or the warranty is still active, let a qualified repair service handle it. They have the right tools, experience, and can guarantee the work.
Bottom line: a faulty control board doesn’t have to mean a brand‑new oven. Spot the signs, follow the safety steps, and you can get your oven back in action without breaking the bank. For peace of mind, reach out to Northampton Appliance Repairs Services – we’ll fix or replace the board fast, affordable, and with a guarantee you can trust.
Replacing the control board on an oven may seem daunting, but it's a common repair that many homeowners face. The cost generally depends on the brand and model of the oven, as well as labor charges if hiring a professional. While some might attempt a DIY fix, understanding the costs, process, and potential pitfalls can help make an informed decision. With a bit of knowledge, you can tackle this repair with confidence and maybe even save some money in the process.
